Improvement of technological properties of metal alloys by nonmonotonic plastic deformation

A. D. Khvan; Хван А. Д.; D. V. Khvan; Хван Д. В.; A. A. Sidorenko; Сидоренко А. А.

doi:10.31857/S086957332503104108

Improvement of technological properties of metal alloys by nonmonotonic plastic deformation

Authors: Khvan A.D.¹, Khvan D.V.², Sidorenko A.A.²
Affiliations:
1. Voronezh State University
2. Voronezh State Technical University
Issue: No 3 (2025)
Pages: 104-108
Section: Articles
URL: https://cardiosomatics.orscience.ru/0869-5733/article/view/688209
DOI: https://doi.org/10.31857/S086957332503104108
ID: 688209

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription or Fee Access

Abstract
Full Text
About the authors
References
Supplementary files
Statistics

Abstract

The article considers the task of improving the technological properties of a material in order to improve the ultimate deformation under the action of tensile normal stresses. The solution of this problem is based on the model of anisotropic hardening by G. Backhouse. The necessary ratios have been obtained to optimize the process of improving the technological properties of the material. In order to experimentally verify the obtained solution to the problem under consideration, experiments were performed on thin-walled tubes under conditions of loading them in the tension-torsion – tension cycle, confirming with an accuracy of less than 90% the possibility of using the proposed method of increasing critical deformation in production conditions.

Keywords

anisotropy, stress deviator, stress intensity, accumulated deformation, localization of plastic deformation, axial stress, nonmonotonic loading, G. Backhouse model, critical deformation, loss of stability condition

Full Text

References

Дель, Г.Д. Технологическая механика / Г.Д. Дель. – М. : Машиностроение, 1978. 180 с. – (Del', G.D. Technological Mechanics / G.D. Del'. – M. : Mech. Eng., 1978. 180 p.)
Талыпов, Г.Б. К теории пластичности, учитывающей эффект Баушингера / Г.Б. Талыпов // Инженерный журнал. МТТ. 1966. №6. С.81–88. – (Talypov, G.B. On the theory of plasticity taking into account the Bauschinger effect / G.B. Talypov // Eng. J. MTT. 1966. №6. P.81–88.)
Бакхауз, Г. Анизотропия упрочнения: теория в сопоставлении с эксперимен-том / Г. Бакхауз // Изв. АН СССР. Механика твердого тела. 1976. №6. С.120–129. – (Backhouse G. Anisotropy of hardening : theory in comparison with experiment / G. Back-house // Proceedings of the USSR Academy of Sciences. Solid state mechanics. 1976. №6. P.120–129.)
Дель, Г.Д. Об устойчивости пластического растяжения анизотропно упроч-няющихся тел / Г.Д. Дель, Д.В. Хван, А.Н. Балакирев. // Изв. вузов. – М. : Машино-строение, 1983. №7. С.8–9. – (Del', G.D. On the stability of plastic stretching of anisotropi-cally hardening bodies / G.D. Del', D.V. Khvan, A.N. Balakirev // Izvestiya vuzov. – M. : Mashinostroenie, 1983. №7. P.8–9.)
Пат. 2217508 РФ. МКИ 7С 21D 7/00. Способ улучшения технологических свойств металлов / А.Д. Хван [и др.]. – №20021022129 ; заявл. 23.01.2002 ; опубл. 27.11.2003. Бюл. №33. – (Pat. 2217508 Russian Federation, MKI 7C 21D 7/00. A method for improving the technological properties of metals / A.D. Khvan [et al.]. – Declaration 20021022129 ; application. 23.01.2002 ; publ. 27.11.2003. Bul. №33.)